| Page 4, Step 1:
Cleco the bottom skin assembly to the spar/main rib assembly and final drill. Disassemble, debur and dimple. |
| Page 4, Step 2:
Temporarily rivet the lower skin to the main ribs [they will be drilled out later]. |
Page 4, Step 3:
Buff the edges of the nose rib flanges.
May 26, 2007: We did this step during the initial deburring (see page 2, step 1)
|
| Page 4, Step 4:
Cleco the nose ribs to the counterbalance. |
| Page 4, Step 5:
Cleco the nose skin and top skin assembly to the spar/main rib assembly. |
| Page 4, Step 6:
Ensure the assembly is flat. |
| Page 4, Step 7:
Bunches of final drilling... |