| (18-5 step 3):
Alright, with new yoke in hand it was time to finish installing
some rivets… so, using a longeron yoke once again we (Angela
came out to get her hands a little dirty) placed a little sealant
around the opening of each rivet hole, inserted a rivet and
squeezed. Have we mentioned we like the ziploc bag
technique! Very little mess! |
| With
the remaining proseal I sealed up the perimeter of each of the baffle
boxes we'll be using for our AE Fuel Gaurdians. I had to cleco
these in place on the ribs to make sure the rivet holes were in the
proper position when the proseal cured. Turned out pretty good! |
| Home | Log By Date | <<Prev | Next>> |