| Just
a couple of little misc things today… its springtime so we've
been doing a few things around the house this weekend. Anyway,
the plans don't call for it, but I know the rivet holes in the rib for
the finger strainer flange need to be final drilled. So, I went
ahead and clecoed the flanges in place & final drilled the flanges
with the ribs, and then deburred. |
| After
that, I opened up the bolt attachment holes for the fuel senders with a
13/64 drill bit. These holes are the correct size for the #8
screws the float type senders use for mounting. But, our
capacitive senders mount with AN3 bolts (which were missing when our
senders were delivered... we're still waiting on those :-( Once
the bolt holes were final drilled, I then final drilled the nutplate
attachment holes and dimpled them since the sender will need to sit
flush against the web of the rib. |
| Home | Log By Date | <<Prev | Next>> |