(17-3 step 11):
Continuing on with a little bit of riveting tonight, I set my eye
on nutplates ;-) Here the #8 nutplates are riveted to the splice
strips. These will be used to attach the outboard end of the fuel
tanks to the outboard leading edges.
|
(17-3 step 12): Next I plugged the stall warning guide holes in the skins with AD3-3 flush rivets.
|
(19-2 step 7):
After that I attached the nutplates on the access hatch doubler
plates. I won't rivet these to the skins until they are back in
the cradles and at least clecoed back together.
|
(17-3 step 13):
In preparation for riveting we placed the skins back in the
cradles and re-assembled everything. We'll start on the riveting
tomorrow.
|
