(10-7 step 2):
An 11 and a half hour day at work today… ugh… even
though I got home about 10:00, I just felt the need to do something on
the plane. So I popped out in the shop for a bit and match
drilled the first of the two F-1047F stiffeners with the lower skin of
the tailcone. This is the first of the twelve stiffeners we cut a
little while ago. These will go from front to rear all around the
circumference of the tailcone. Once I had the 50 or so holes
drilled, I was ok... I could now call it a night.
|
