(8-3 step 3): Angela started the day by carefully measuring and drilling the holes in the horizontal stabilizer attachment brackets.
|
(8-4 step 1): After
the brackets were done, she was off to the next step... trimming the
front horizontal stabilizer front spar caps & stringers.
|
After
trimming all 6, then came the deburring. Lots of deburring on an
airplane, although we're learning not to do as much as we have
been. I think we could still do even less. Just gotta bring
ourselves to do it!
|
(8-5 step 1):
Next she started the deburring process on the horizontal
stabilizer front spar. Once we get all the spars, doublers, and
caps ready, we'll see about priming all of them.
|
