(8-2 step 3):
Angela continued on with the horizontal stabilizer tonight.
Here she's final drilling the #12 holes in the HS-912 hinge
brackets. There are 8 of these and they are used to attach the
elevators to the horizontal stabilizer.
|
(8-2 step 2): Angela
then moved on to the rear spar and finished up deburring all the
lightening holes. She got a little frustrated trying to determine
an effective method to do this. After that, she clecoed in the
HS-906 rear spar doubler and bagan the process of match drilling the
holes indicated in the plans.
|
And
finally, she countersunk the 2 center holes in the spar, and
final-drilled the 2 holes above and below to #12. These holes
will be used to attach the inboard bracket assembly.
|
